Tridon - Ignition

Ignition Modules

Tools
  • The Ignition Module is an integral part of the vehicle ignition system. The ignition module provides switching of the ignition coil at the correct time and for the correct duration; this is achieved through a signal from a pickup coil, Hall Effect or optical sensor or the ECU.
  • The ignition module also limits current to the ignition coil to prevent overheating and loss of performance caused by excessive temperature.
  • The ignition module must be compatible with the vehicle ignition system; the Tridon ignition module range has been carefully researched and engineered to suit each specific application.
  • Please refer to the Tridon Part Finder for the correct ignition module for your application.
Part No.NameFeatures
TIM001Ignition Module• 9 terminal
•Used with hall pickup and ECU feedback control
•Heat sink compound must be used.
TIM-GR20Heat Transfer Compound• Thermal compound grease, used to protect and insulate electrical connections, while providing excellent thermal and electrical conductivity.
•Pack of 20 sachet's
TIM002Ignition Module• 6 terminal
•Used with inductive pickup
TIM003Ignition Module• 4 terminal
•Used with inductive pick up
•Heat sink compound must be used
•Interchanges part - J105
TIM004Ignition Module• 3 terminal
•Ignition module and pickup combined
•Heat sink compound must be used
•Interchanges part - E12-61
TIM006Ignition Module• 6 terminal
•Used with hall pickup
•Heat sink compound must be used
TIM007Ignition Module• 6 terminal
•Used with inductive pickup and twin ignition coils
•Heat sink compound must be used
•Interchanges part - J304
TIM008Ignition Module• 2 terminal
•Ignition module and hall trigger combined
•Heat sink compound must be used
•Interchanges part - J152
TIM009Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM010Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
•Interchanges part - J117
TIM011Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM012Ignition Module• 8 terminal
•Used with inductive pickup and ECU feedback control
•Heat sink compound must be used
TIM013Ignition Module• 5 terminal
•Used with inductive pickup
TIM015Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM016Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM017Ignition Module• 7 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM018Ignition Module• 7 terminal
•Used with hall pickup
•Heat sink compound must be used
TIM019Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
•Interchanges part - J106
TIM020Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
•Interchanges part - MC-5357
TIM021Ignition Module• 5 terminal
•Used with inductive pickup
•Interchanges part - MC-5157, MC-5357 & MC5787
TIM022Ignition Module• 5 terminal
•Used with inductive pickup
TIM023Ignition Module• 6 terminal
•Used with inductive pickup
TIM024Ignition Module• 5 terminal
•Used with inductive pickup
TIM025Ignition Module• 5 terminal
•Used with inductive pickup
TIM026Ignition Module• 7 terminal
•Used with hall pickup
TIM027Ignition Module• 6 terminal
•Used with inductive pickup
•This ignition module is r.p.m. limited
TIM028Ignition Module• 7 terminal
•Used with inductive pickup
TIM029Ignition Module• 6 terminal
•Used with inductive pickup
TIM030Ignition Module• 5 terminal
•Used with hall pickup
TIM032Ignition Module• 4 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM033Ignition Module• 4 Terminal.
•Used with inductive pickup.
•Heat sink compound must be used.
TIM034Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
•Interchanges part - J120 & J170
TIM035Ignition Module• 5 terminal
•Used with inductive pickup and knock sensor feedback
•Heat sink compound must be used
•Interchanges part - J208, J207
TIM036Ignition Module• 3 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J121
TIM037Ignition Module• 3 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J701
TIM038Ignition Module• 2 terminal
•Controlled by E.C.U.
TIM039Ignition Module• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
•Interchanges part - J153
TIM040Ignition Module• 3 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM041Ignition Module• 4 terminal
•Ignition module and pickup combined
•Twin ignition and feedback control
•Heat sink compound must be used
TIM042Ignition Module• 6 terminal
•Controlled by E.C.U.
TIM043Ignition Module• 4 terminal
•Controlled by E.C.U.
TIM044Ignition Module• 5 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM045Ignition Module• 4 terminal
•Used with inductive pickup
TIM046Ignition Module• 4 terminal
•Used with inductive pickup
TIM047Ignition Module• 9 terminal
•Used with hall pickup and E.C.U. feedback control
•Heat sink compound must be used
TIM048Ignition Module• 6 terminal (coil).
•14 terminal harness socket
•Distributor-less ignition control module
•Used with single coil pack (TIC032)
TIM049Ignition Module• 6 terminal (coil)
•14 terminal harness socket
•Distributor less ignition control module
•Used with 3 separate coils (TIC002)
TIM050Ignition Module• 4 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM051Ignition Module• 4 terminal
•Used with inductive pickup
TIM052Ignition Module• 4 terminal
•Used with inductive pickup
TIM053Ignition Module• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM054Ignition Module• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control.
TIM055Ignition Module• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM056Ignition Module• 7 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM057Ignition Module• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM058Ignition Module• 5 terminal
•Controlled by E.C.U.
TIM059Ignition Module• 5 terminal
•Controlled by E.C.U.
TIM060Ignition Module• 4 terminal
•Used with inductive pickup
TIM061Ignition Module• 12 terminal
•Controlled by E.C.U.
TIM062Ignition Module• 7 terminal
•Controlled by E.C.U.
•Interchanges part - J722T
TIM063Ignition Module• 5 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM064Ignition Module• 2 terminal
•Heat sink compound must be used
•Interchanges part - J911
TIM065Ignition Module• 4 terminal
•Ignition module & pick up combined
•Heat sink compound must be used
•Interchanges part - E12-117
TIM067Ignition Module• 6 terminal
•Controlled by E.C.U.
TIM068Ignition Module• 8 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J702T
TIM069Ignition Module• 9 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J723T
TIM070Ignition Module• 6 terminal
•Used with inductive pickup
TIM071Ignition Module• 5 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM072Ignition Module (Genuine Quality)• 2 terminal
TIM073Ignition Module• 5 terminal
•Controlled by E.C.U.
TIM074Ignition Module• 9 terminal
•Controlled by E.C.U.
TIM075Ignition Module• 6 terminal
•Controlled by E.C.U.
TIM076Ignition Module• 4 terminal
•Built in inductive pickup.
•Heat sink compound must be used.
TIM077Ignition Module• 6 terminal
•Controlled by E.C.U.
TIM078Ignition Module• 11 terminal
•Used with inductive pickup
•Distributor less ignition control module
•Use with separate 3 coils (TIC002)
TIM079Ignition Module• 5 terminal
•Controlled by E.C.U.
TIM080Ignition Module• 6 terminal
•Controlled by E.C.U.
TIM081Ignition Module• 4 terminal
•Used with inductive pickup
TIM082Ignition Module• 5 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J118
TIM083Ignition Module• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM084Ignition Module• 4 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - E12-303
TIM085Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM086Ignition Module (Genuine Quality)• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM087Ignition Module• 7 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM088Ignition Module• 6 terminal
•Controlled by E.C.U.
•Hall Effect Trigger Module
•Interchanges part - J882
TIM089Ignition Module• 6 terminal
•Controlled by E.C.U.
•Hall Effect Trigger Module
•Interchanges part - J881
TIM090Ignition Module (Genuine Quality)• 4 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - E12-127
TIM091Ignition Module• 4 terminal
•Controlled by E.C.U.
•Module without heat sink plate attached
•Heat sink compound must be used
•Interchanges part - E12-303
TIM092Ignition Module (Genuine Quality)• 3 terminal
•Heat sink compound must be used
•Interchanges part - E12-308
TIM093Ignition Module (Genuine Quality)• 4 terminal
•Controlled by E.C.U.
•Interchanges part - MC-8541
TIM094Ignition Module (Genuine Quality)• 4 terminal
•Controlled by E.C.U.
•Interchanges part - MC-8541
TIM095Ignition Module (Genuine Quality)• 4 terminal
•Controlled by E.C.U.
•Interchanges part - E12-303
TIM096Ignition Module (Genuine Quality)• 4 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - E12-310
TIM097Ignition Module (Genuine Quality)• 14 terminal
•Controlled by E.C.U.
•Module with heat sink plate
•Interchanges part - MC-8430
TIM099Ignition Module (Genuine Quality)• 4 terminal
•Used with inductive pickup
•Heat sink compound must be used
•Interchanges part - E12-117A
TIM100Ignition Module• 7 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM101Ignition Module• 6 terminal
•Controlled by E.C.U.
•Hall Effect Trigger Module
•Interchanges part - J885
TIM102Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J723T & J9T05071
TIM103Ignition Module (Genuine Quality)• 8 terminal
•Used with inductive pickup
•Heat sink compound must be used
TIM104Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Interchanges part - J723T
TIM105Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Interchanges part - J723T
TIM106Ignition Module (Genuine Quality)• 3 terminal
•Used with inductive pickup
TIM107Ignition Module• 13 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J716
TIM108Ignition Module (Genuine Quality)• 13 terminal.
•Controlled by E.C.U.
•Interchanges part - J716
TIM110Ignition Module• 6 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM111Ignition Module (Genuine Quality)• 5 terminal
•Controlled by E.C.U.
TIM112Ignition Module (Genuine Quality)• 10 terminal
•Controlled by E.C.U.
TIM113Ignition Module• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control.
TIM114Ignition Module (Genuine Quality)• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control.
TIM115Ignition Module (Genuine Quality)• 5 terminal
•Controlled by E.C.U.
TIM116Ignition Module (Genuine Quality)• 5 terminal
•Controlled by E.C.U.
TIM118Ignition Module (Genuine Quality)• 6 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM119Ignition Module (Genuine Quality)• 4 terminal
•Used with inductive pickup
TIM120Ignition Module (Genuine Quality)• 5 terminal
•Controlled by E.C.U.
TIM121Ignition Module (Genuine Quality)• 9 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM122Ignition Module (Genuine Quality)• 6 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM123Ignition Module (Genuine Quality)• 9 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM125Ignition Module (Genuine Quality)• 6 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM126Ignition Module (Genuine Quality)• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM127Ignition Module (Genuine Quality)• 5 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM128Ignition Module (Genuine Quality)• 6 terminal
•Used with inductive pickup and E.C.U.
•Feedback control
TIM131Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Interchanges part - J714
TIM132Ignition Module (Genuine Quality)• 5 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
•Interchanges part - J142
TIM133Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Interchanges part - J144
TIM134Ignition Module (Genuine Quality)• 9 terminal
•Controlled by E.C.U.
•Heat sink compound must be used
TIM135Ignition Module (Genuine Quality)• 2 terminal
•Module and inductive pickup combined
•Use screws and replacement instructions provided
TIM136Ignition Module (Genuine Quality)• 3 terminal
•Used with inductive pickup
TIM137Ignition Module• 7 terminal
•Hall Effect sensor